honda 200s custom brakes????

[cutthroatxxx]

Ok so I have a 200s that dosent have back breaks,let me explain everything the brakes are there the cable is there but the pedal is missing&where it once was its broke(just a hole in the pipe.)Now I unlike some of you love brakes!Espically seeings I live in the country&I have a great place to rid that's full of steep hills&trees.I do have front brakes but I'd like to have both.I have a pedal&cable Off of an 82 110 I just sold but dosent look like it'll wok.I'm wondering is there a way to hook up the stock cable to a hand brake?

[MrPretty]

If its a 200s it should have a foot and hand brake for the rear.

[harryredtrike]

sure there is a way to hook everything to a hand brake.you will need a longer cable and make a bracket for the rear brake.it can be done for sure

[Ironbnder]

A 200s had a front brake handle on one side of the handle bars and a rear brake handle on the other side. The brake lever on the drum should have a place for two cables. One was foot and the other was hand. All your hardware must have been removed before you got it. You should be able to buy all these parts off most 185s or 200s and bolt it back on.

[cutthroatxxx]

Ok I'LL look on cl but I think Ill have to weld something up for there is that hole I was talking about,this one doesn't have a tag on it like my previous atc's that have the year on it.But I belive it to be an 84.I just sold a 85 this past summer &there was no reat hand brake either&I just can't seem to remember how the pedal was attached.

[MonroeMike]

Enter the VIN here.

http://atcvin.webs.com/

Check the manual about the brakes.

http://72.52.143.80/~trikes/Manuals/ATC%20manuals/ATC200S%2084-86%20Shop%20Manual.pdf