View Full Version : Need 84 Honda 200ES Electrical Info
2cycletriker
09-19-2010, 07:04 PM
I'm getting ready to start on an 84 200ES that has no spark. Just curious about the measurements I should be looking for. What resistance should I see across the pickup coil and coils in the alternator? I have a wiring diagram and I know some about electronics but I don't know what I should be looking for. What about the coil? Low, like .3-.8 ohms across the primary and maybe 2500 or so across the secondary? What kind of voltage outputs should I see across the pickup and alternator coils as I crank the engine over? Any other "secrets" I should look for in the ignition system? Any help would be appreciated. Thanks!
dcreel
09-19-2010, 07:08 PM
Here is your manual
http://www.oscarmayer.net/atc/manuals/honda/1984_200es_bigred.pdf
2cycletriker
09-19-2010, 08:01 PM
Got it...excellent. Thanks.
2cycletriker
09-19-2010, 09:06 PM
What about the pulse generator? Anyone know what that should measure as far as resistance goes? I can't find it in the manual. It measures 30 ohms. What type of voltage or pulse should I see across the leads?The coil and alternator check good. Good voltage at the alternator when I pull the rope. All switches are functioning properly.
2cycletriker
09-20-2010, 12:02 AM
Never mind. Turns out the spark advancer is toast. Thanks again for the link to the manual. Saved it to disc.
JustEnough
09-22-2010, 11:15 PM
How did you determine that the spark advancer is toast?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.