PDA

View Full Version : 85 ATC 250sx breather pipe hookup



jays375
09-14-2010, 05:42 PM
Where does the end of the breather pipe on a 85 Honda 250sx go after it leaves the motor.

Dirtcrasher
09-14-2010, 05:59 PM
I think it has a single hookup then it "T'"s" into a double. One goes out the bottom and another up into the frame - This just MEMORY!!

ANY website with a microfiche ought to show you whats up. It has a thin bracket to hold it all in place, clips bent on the frame............

Bike Bandit, Service Honda should show whats up or ask for a manual in PDF form, Monroe Mike is super helpful as are many for this in providing links for a manual............

Starting a new thread looking for a shop manual may help you out.

EDIT - http://www.servicehonda.com/look-up-parts/03 - #22 is your is part, #23 and #1 are the other tubes.

Please, learn how to do this yourself....... only benefits you!

ailll1
09-14-2010, 07:48 PM
One end goes right over the airbox passing under the gas tank.

Ironbnder
09-14-2010, 08:01 PM
Dc, did you really just advise him to start a thread and ask for a manual? :wondering

jays375
09-14-2010, 09:25 PM
I had looked it up.Figure there was a tee due to length of hose that was still on motor.Assumed one end went to the air box but the other line on the tee had me stumped.Haven't worked on one of these in a while.