atc90/110 front suspension forks

[czlou]

I found a atc185 with a front suspension kit on it. just wondering if it will fit a atc90 or 110? If not, will any thing cross over to to the 90/110 kit when i find one for my project? fork legs or ? czlou

[motoman1012002]

its a bolt on deal deal if you dont get it I have a front end for you full susp

[Jeepermc]

I just bolted on a 200S front end to one of my 90's....Easy as pie.... I had to remove the steering stops on the 90 frame though.... You'll have to come up with a headlight mount if you have one...

[atc350xer]

Yep... direct bolt on, just need to address steering stop issues.

[Jeepermc]

That's somethign I need to do now before the kid bangs up the tank...What do people normally do for stops since they are completely different between the two trikes?...

[atc350xer]

On my 90 with 185s forks, the PO put a bolt and nut on either side of the lower triples to hit the stop... it works

[Jeepermc]

Like drilled a hole in the lower triple and put a bolt and nut there? Where does it hit on the frame? Got a pic you can post of it?

[atc350xer]

Like drilled a hole in the lower triple and put a bolt and nut there?

Exactly... sorry for the fuzzy pic, couldn't get a better one.

[Jeepermc]

Ok...Great..I'll have to take a look at mine and see. Does yours hit the stop on the front of the neck? I might have taken off too much for fork clearance on mine for that to work....We'll see...

[Jeepermc]

I think those forks may be different from mine for some reason....I had to remove all of the steering stop from my frame plus a part of the pinch weld to get clearance for the lower triple on mine. I ended up welding two pieces of round stock to the side of my frame in strategic places to act as stops. It worked out fine for me.