PDA

View Full Version : Clutch cable replacement...



three_wheelin45
08-07-2010, 09:09 PM
Okay well I just got done pushing my X almost 2 miles :mad: The freaking clutch cable broke while I was out on the trail, I just purchased this clutch cable 4 months ago I think its OEM, So I was wondering what aftermarket clutch cables are good?


Zack

Thorpe
08-07-2010, 10:34 PM
If it only lasted 4 months, you must not have had it routed correctly, or it was rubbing on something to last such a short while... Why didnt you push it down a hill in neutral, and kick it into gear and ride it home? Rode my CR250 back like that after breaking a clutch lever before...

three_wheelin45
08-07-2010, 11:31 PM
I didnt want to mess it up & never thaught of that :lol: It broke right were the ball hooks to it. Mabey I had it to tight? and it finaly snapped

squirrel1182
08-07-2010, 11:35 PM
could have been to tight. When you pulled it all the way did your clutch lever touch your grip? i have my clutch on my klt set so it just barely touches the grip so i know im not too tight.

three_wheelin45
08-07-2010, 11:36 PM
could have been to tight. When you pulled it all the way did your clutch lever touch your grip? i have my clutch on my klt set so it just barely touches the grip so i know im not too tight.

Yea It has allways touched the grip(i dont like it not touching it, makes me feel like im not pulling it in enough)

squirrel1182
08-07-2010, 11:41 PM
Mabey you just got a weak cable. I like my clutch set like you do.

three_wheelin45
08-07-2010, 11:43 PM
Well what is the best brand for cables?

squirrel1182
08-08-2010, 12:01 AM
I dont know i just bought an oem one that fits my motor. I bought a motion pro but it was wrong one and it looked a little thinner than the oem one.

three_wheelin45
08-08-2010, 12:08 AM
OK well mabey Ill go OEM again, ill probaly buy 2 just in case.

squirrel1182
08-08-2010, 12:14 AM
2 would be a good idea and if theres somewhere on your trike whare you could store the spare that would probablly be really good. just in case.

Xpress
08-08-2010, 12:25 AM
Motion Pro cables do work, especially if your clutch cable mounting bracket is in the right place....

BTW, you could have ridden it home just fine without the clutch. Might not be the best thing in the word, but it does work.

three_wheelin45
08-08-2010, 12:50 AM
hehe I tried to pull the cable with my teeth, needless to say it didnt work :(

Thorpe
08-08-2010, 10:24 AM
I have ridden my dirtbikes, trikes, street bikes without clutches in a pinch... Its no problem to shift without the clutch, just dont stop!