85 200x questions

[TrikemanATC200x]

hey everyone, i have a couple 85 Honda atc200x questions, any input or help is absolutely welcome seeing as i need some ideas.
first question, i recently bought a aftermarket carb(knockoff) because the fuel and air mixture screw was pretty much screwed on my stock carb, my machine runs fine now, but i get a slight bog when i shift gears so im thinking i have to change the jets to the stock jets. i have heard of this problem many times so im wondering if i am correct and if thats all ill need to do. and possibly what are the stock jet settings are.

second question, i got a wobble in my right rear tire, so i though it was a bent or off hub so i changed the hub and it still does it, its not the axle though because the other sides fine and it looks straight to me so im sure its the rim, so question is what rims will work with the stock hubs, possibly a list of what rims would work or something around there. if im correct the stock rim bolt pattern is 4/110? not to sure, anyways ANY help will be highly appreciated,
thanks in advance cory

[RodKnockRacing]

They are 4/110

[Grizzlypeg]

I'd try raising the needle first, as that costs you nothing. The higher the needle, the further it is out of the needle jet, and the more fuel flows at part throttle.

[TrikemanATC200x]

well i have the stock jets so it would cost me nothing either way.

[RapidRick]

About the tire, I've got a pair that one makes the trike feel that way too. Axle is straight and rim is straight but the tire has some sort of imperfection in it like it's out of balance at speed. Sometimes if you have a tire made out of nylon it will feel out of balance too for a while. Hope it helps

[harryredtrike]

download a free manual in the world class help section it will have the stock info you want,plus you should have manual anyway

[TrikemanATC200x]

harry could you direct me to that please, but will the stock jet work even though its a knock off?

[MonroeMike]

http://72.52.143.80/~trikes/atc200x_83-85_servicemanual.pdf

[harryredtrike]

harry could you direct me to that please, but will the stock jet work even though its a knock off?

click on the link from monroemike's comment for the manual,and the stock jet info and mixture screw setting are probably not the same now.this has been done before by members on the board hopefully they will chime in,i dont have much experience with replacement carbs(non oem)

[TrikemanATC200x]

alright thanks, but here is another question im wondering if any year 300ex rear rims will work since they are 4/110 bolt pattern?
thanks

[TrikemanATC200x]

another question im wondering if any year 300ex rear rims will work since they are 4/110 bolt pattern?
thanks

[TrikemanATC200x]

anyone? anything?

[dcreel]

another question im wondering if any year 300ex rear rims will work since they are 4/110 bolt pattern?
thanks

Yes, they will work. So will the hubs to make your 200x a little wider.

[TrikemanATC200x]

alright thank you very much, maybe know of any others besides the 300ex?

[Stonecoldchavez]

I have 400ex hubs on my 200x. 300ex and 400ex wheels will fit the 200x because of the 4/110 bolt pattern.

[TrikemanATC200x]

would 250r rims work or any year 200x work, cause im having a tuff time finding rims with a tires on them for some what cheap on ebay

[MonroeMike]

http://www.mud-throwers.com/atv_wheel_chart

[TrikemanATC200x]

thank you so much mike, that helps me out alllllooot.