200x change to three bolt hole front sprocket?

[Grizzlypeg]

I finally got the 11T front sprocket I ordered on ebay for my 84 200x. Unfortunately it was not as illustrated on the ebay picture, and has 3 holes for the retainer (or however that part works, haven't taken the old one off yet to find out).

Is it practical to use this 3 hole sprocket on my 200x? If so, what parts do I need to change to a 3 bolt hole sprocket?

[harryredtrike]

all you need is a three hole keeper

[Grizzlypeg]

all you need is a three hole keeper

Do you think I might be able to buy one off ebay, along with the bolts. Ebay is the easiest way for me to buy, as I'm in Canada, and on ebay they specify shipping costs. I hate to pay $30 to have a $10 item shipped.

What would it be properly called if I'm looking for one? Do I order one from a 185?

I've tried looking at partspitstop and another site, but I can't find any front sprockets or the keeper. Even tried the 185S.

[harryredtrike]

id look for drive sprocket keeper or fixing plate

[harryredtrike]

the 1983 185s drive sprocket with keeper or fixing plate is what youll be looking for.this part is still available at a dealer SKU: 23801-958-000
SPROCKET, DRIVE (11T) (Honda Code 0841890) 1 $10.31
14 SKU: 23802-958-000
PLATE, FIXING (Honda Code 0841908) 1 $3.18

[shortline10]

You will need the bolts to very important . Their special 6mm sholder bolts designed so the chain doesnt rub against them .

[harryredtrike]

^^^^^^absolutely SKU: 90084-041-000
BOLT, DRIVE SPROCKET FIXING (Honda Code 0174995) 3 $3.00

[Grizzlypeg]

Excellent information!

Thanks so much.

[Grizzlypeg]

Do you know of a place I can order these parts online? For some reason I can't find front sproket schematic on partspitstop or cyclepartsnation.

[shortline10]

Here ya go .

http://www.dratv.com/attrandfrsp.html

http://www.dratv.com/spreplalal.html
http://www.dratv.com/bolfronsproc.html