bigbadktm
07-12-2010, 12:16 AM
ok so i bought this bike with no spark, didn't know that at the time, just bought it not running for unknown issues. But enough about that, I cannot get spark after replacing just about everything electrical. So far I have replaced the stator, the coil, the on/off switch, the CDI, essentially everything but the wiring harness and the voltage regulator.
I found out the old stator was shot after removing it and seeing its condition, and hoped that that would have been the culprit. I can now see the light come on when I kick it over, just no freaking spark. I am getting so irritated all I want to do is ride this puppy.
So I don't have an ohm meter nor do I really know how to use one, but what else can I check or replace that I haven't already. Could I have possibly gotten 2 bad CDI units in a row, one being the original and the second being my ebay special?
Help is greatly appreciated, and much needed, thanks :cry:
I found out the old stator was shot after removing it and seeing its condition, and hoped that that would have been the culprit. I can now see the light come on when I kick it over, just no freaking spark. I am getting so irritated all I want to do is ride this puppy.
So I don't have an ohm meter nor do I really know how to use one, but what else can I check or replace that I haven't already. Could I have possibly gotten 2 bad CDI units in a row, one being the original and the second being my ebay special?
Help is greatly appreciated, and much needed, thanks :cry: