need motor swap help!!!

[tshank]

hey im new to this, i just got and early 80's atc 110, i was wondering if there were and motors that are bigger that swap in easly?? please help?!?!?!

[atc350xer]

almost any lay down (horizontal) pit bike motor up to 140cc's or so should bolt right in, but you'd need the wiring harness, etc. from the new engine

[motoman1012002]

the pit bike motors you will have to shim they are 50 and 70 size case's not the size of the 110 case's

[dan jerkins]

i am not positive but i think you can put a 200 on that trike there are lots of them out there

[86trizinger]

200's are not gonna fit easily. DR ATV sells the brackets you need for $15 to put a pit bike engine in.

[bobotech]

Tell me about these pit bike engines. What kind of power and strength do they have? My 110 is somewhat lacking in power due to me being a big guy.

[86trizinger]

I have a 140cc Piranha engine in mine. Rated at 11hp.. Makes alot of power on the top end but has decent bottom end as well. I weight around 200lbs and it will pull the front wheel off of the ground with ease. I am not sure how much you weight though. I paid around 350 for the complete engine with all electronics and carb.

Dr atv sells the adapter for $14 and if you want to use stock 110 pegs they also sell the foot peg adapter. Then you can just run a pit bike exhaust and bend it slightly to fit. I paid $60 for my exhaust