Carb settings for '82 110

[Lorrel33]

Anyone have the manual scanned or know what the settings suppose to be? I got a Clymer's on order but am anxious to get it running right.

[hondaATCman]

My manual's out in the shop, but I know the needle clip position is 3rd slot, jets are 35 and 85?, air screw is 1 1/4 out, and you'll have to adjust the idle screw when its running. Hope that helps,

[Lorrel33]

Ok. It was in the 3rd slot, and one of the jets was 35 but I didn't check the other one. I didn't know what the air screw was suppose to be. This thing has been sitting for about 5 years and was curious to see if it would start up so hauled it behind my 185S and the thing fired right up (recoil is broke or I would have cranked it). You can't kill these things. Last time it was run it was used to haul 4' wood.

Thanks for the help.