Who's got the best ONE

[motoman1012002]

WHos got the best 250r with some mods post some pics here.

Edited by Howdy: Topic corrected. It Who's not hows . lol

[MR ATC]

it all depends on what you consider the "best"

best for MX

best for trail

best for sand

best for all around

ect.

[motoman1012002]

I should said hows got the nicest one

[MR ATC]

nicest stock

or

nicest modified

[motoman1012002]

both it doesnt matter just want to see some nice R's

[ATC crazy]

LMAO :D MR ATC.....you always have to make it difficult on other people...lol

[Curtis-Tecate3]

I guess I will chime in and give my 2 cents...Sorry if it doesnt apply 100% to this topic motoman.
Why does everyone always want to see pics on the message board when there are tons of them available on the website..Are people just lazy and dont want to look within the site for particular things? I realize that this doesnt apply 100% to the original topic above but I seem to see this all the time anymore. I am sure that these pics eat up tons of space for the board.


Sorry, just venting a bit.

Curtis.

[200x Basket]

because the pics are nice to see and you can read a story with them. you go check the same old pics ont he site everyday, i want to see new ones :D

[CHAINSAW]

I wanna see some modified custom ones..

Im sick of looking at red stock 250Rs.. that is BORING!! hehe


Now lets see some custom ones!

[smokinwrench]

Now lets see some custom ones!

I want to see some new pictures of lets say a black 250R with flames. Anyone have such a beast? :D

Josh

[350Xccelerator]

lets see some pics then!!

[CHAINSAW]

The shop said first part of next week my cylinder will be done.. Ill snap some pics as soon as its together..

p.s. I did away with the red headlight..... but you gotta wait to see what I replaced it with.. lol Its evil. :twisted:

[Dirtcrasher]

I guess I will chime in and give my 2 cents...Sorry if it doesnt apply 100% to this topic motoman.
Why does everyone always want to see pics on the message board when there are tons of them available on the website..Are people just lazy and dont want to look within the site for particular things? I realize that this doesnt apply 100% to the original topic above but I seem to see this all the time anymore. I am sure that these pics eat up tons of space for the board.


Sorry, just venting a bit.

Curtis.

Post up some other sites with pics and maybe it will avoid some of this.

[MR ATC]

well since no one has posted ANYTHING i guess i post a pic of my never before seen on the internet HRC ATC 250R replica under restoration and on hold for now project. sorry for the lousy pic but its a borrowed camera (this is why i don't post newer riding pics)

MODS include;

HRC short track tank kit
Mugan/showa/HRC rear shock
Mugan/showa/HRC cartridge forks (not in pic )
H.D. fork springs
2000 CR 250R ignition
Hinson clutch basket
Hinson clutch hub
Hinson pressure plate
RAD tappered bearing axel carrier
"national" porting specs.
shaved head
cr gaskets
??? racing crank
boyeseen rad valve
boyeseen float bowl
keihin 39mm PWK carb
paul turner pipe (not in pic)
hinson adjustable timing plate
renthal cr low bend handlebars (not in pic)
aluminum kick start lever ( not in pic)
aluminum gear shift lever (not in pic )
removable aluminum sub frame with air box (not installed yet )
works connection clutch lever assembly (not in pic )
pro circut rear brake resevoir (not installed yet )


parts waiting for;

excaliber axel/ hubs
aluminum swingarm (under construction )
hinson two piece clutch cover
aluminum brake hub/lock nut
carbon fiber beadlock wheels
aluminum exhaust flange


plus a bunch i probably forgot about

[250rmanfmf]

I have a 85 250r YELLOW, chrome and black Custom Drag ATC. I need someone to post pics because it never lets me and I have never figured out how to downsize. mods are below, there is no other 250r like this one, I had to order 5 sets of plastics just to get them.

Mods

Engine
Hot Rods Crank and Long rod
.60 over modified Weisco Piston
Full drag Port and Polish
Shaved Head
CR Head Gasket
Hinson Clutch
Modified Stock reed cage w/Pro Series Boyseen Reeds
39mm Klen. Carb (going to be getting a 41 or 42mm)
Unversial K & N Open Airfilter w/cover
FMF Fatty Pipe
FMF Silencer no spark arrestor
MSD Ingition (Coming sometime)
Ricky Stator Stator modified for MSD

Other parts
Yellow Plastics
1 foot extended Swingarm (Chrome)
Polished Motor
Sand tires
Custom Seat
Black Gas tank
lots of chrome and yellow and black

Let me know if anybody can post pics. It has everything on it minus MSD Ingition

Thanks
Tyler

[Billy Golightly]

Tyler,

You can email them to me HondaATC@3wheelerworld.com and when I get them I'll resize and upload them + email the resized ones back to you.

Billy

[250rmanfmf]

HondaATC will be posting some pics, thanks again HondaATC,

The pic is not fully together because waiting on Ignition and modified Flywheel. so thats why some of the stuff is not on or its not bolted down like the tank.

anyways more items

13/39 front/rear Sprokets
Rebuilt Rear Chrome/polished rear Shock
TAG Handlebars
RK Chain
DuraBlue Rear Axle
DuraBlue Bearing carrier
all new seals and bearings
JL Aluimium Billet Kickstarter
Aliumium Billet Shifter
Aliumuim Billet Exhaust Manifold
Stainless steel braded Hoses
DG Grab bar
lots more have about 7-9,000 dollars into the bike.

I am looking some decals/stickers to put on the bike but dont want to rush and then not like them so I am taking my time with it

let me know if you want to know anything else
Mike from Long Island bought a set of Yellow plastics from me and I think he is selling them if you like it.

Thanks
Tyler

[AirManCam]

only one picture on this whole topic lol. Pethitic! Lmao jk guys :D

[Billy Golightly]

Heres the pictures of the Yellow 250R. Definetly sweet looking.

[350Xccelerator]

:shock:

[MR ATC]

very nice looking were did you get the yellow plastic?

[250rmanfmf]

well, I had to talk to Maier and have them specially make them, but I had to order 5 of each item so between the rear plastic, front fender, headlight shell, and the Shrouds I paid like $1,350 it was worth it because I liked the yellow so much and wanted to make a sweet bike. When it is complete I will take finally pics of it in the day time. Also working on some custom aluimuim radiator guards

Thanks
Thanks again HondaATC
Tyler

[350Kris]

So you talked to Maier....cool. Do they still make headlight shells for the 350X? I know they did at one time. Thanks.

Kris

[350Xccelerator]

did you sell the other plastics you had to order?

[TeCaTe_MaN]

sweeeeeet R :-D :shock:

[motoman1012002]

only 2 bikes wow Mr atc post some more pics of that bike you going to keep it or sell it

[AirManCam]

:shock: :shock: Is it forsale :twisted: I didnt know durablue made tapered axles.

[motoman1012002]

hey mr atc you got more pics of that bike

[MR ATC]

no but, i could take some. what are you looking to see?

the camera i borrow is not that good.

[motoman1012002]

Any part of the bike up close rear end forks motor close up to the tank and frame you going to sell this one Mr atc or part it out

[AirManCam]

I doubt he is going to do either. I think he will just keep it and make her nice. I might have to buy me a r chassis and motor if you wanna sell some of them plastics :D

[250rmanfmf]

I kept a couple sets of plastic and sold a couple, Mike From Long Island has a set that he bought from me and I think he was selling them because he has too many projects.

[MR ATC]

you going to sell this one Mr atc or part it out

we'll if i could get half (over 8000) of what i put into it i would sell it, but that won't happen. if i can sell all my other stuff i will keep this and hopefully have it ready for tf 04. if i don't sell the other stuff then this must go to pay legal bills that are getting up there again and i will part it out.

what price legal victory?...so far 19,800.00 and climbing

[motoman1012002]

are you going to post some new pics mr atc

[200x Basket]

no matter what we think of each other, that sucks!!!!!!!!!!!!!! good luck!!

[MR ATC]

no matter what we think of each other, that Bites!!!!!!!!!!!!!! good luck!!

Thanks Basket, and just think what would have been if that 19,800.00 had gone into my trikes :shock: :shock: :shock: instead of legal fees.

400X done by winter 02/03
tigerlily's 350x done. by winter 02/03
250R done by spring 03
500R done by mid summer 03
all new design trike in progress and probably 50% done by now


moto, next time i go to the stroage shed i'll take some pics

[350x'inNY]

MR ATC.... Hey... I got some friends in Corning that are taking me to some dance club in Binghamton. (Women :rolleyes: ) Anyhow, I could feel legite for making a 2hr drive each way if we could meet up. I can bring my digital camera and take more pics (I only got pics of your 400X when I picked up the plastic and speedo) AND I could pick up that Tachometer Mount and that Parking Brake Cable.... and maybe some more parts!

I finally got all the parts to pull my front end apart, but am a lil timid to do so! I've never messed with that stuff. (The Big Red didn't have much of a suspension!) Do you do freelance fork rebuilds? I got the Progressive Springs like you suggested, Moly seals, Front Axle bearings, New Fork Oil, OEM Honda boots, the 350X Speedo Gearbox and that Headlight guard to mount up! I also wouldn't mind checking out your track!! Soooooooo.... you busy Friday or maybe Saturday?

Bruce

[MR ATC]

Friday, will not be a good day. i will be in court all day :evil: :evil: :evil: . saturday may be a posibility. i'll pm you my number in case you lost it.

[86250RZ]

Here's my R I think mine is the BEST. You know why because I own it LOL.

[AirManCam]

Wow thats a nice r! Did you win it at bingo :D Sorry to hear that mrs errrr mr atc ;) I hope it gets better for you and by the way. I think your dates are a little of eh?

[MR ATC]

I think your dates are a little of eh?


no those are the aproximate finish dates had my life not been turned up side down. my plan was to bring out a new trike at each trikefest.

at 02 i bgought out my 85 350/360X.

at 03 i was to bring the 400X and tigerlilly's 350X.

at 04 i was gonna bring the 250R and 500R.

thats what could/would have happened

[AirManCam]

Oh i see. that sucks im sorry for all the badluck. :(

[Big Otiz]

Here's Mine!

[350Xccelerator]

That is one sweet arse 250r.why does it say coutesy of ford truck world down at the bottom of the pic?

[motoman1012002]

very nice

[AirManCam]

Thats not his 250r. :rolleyes: I have had that pic for a while.

[ATC crazy]

I have also seen that picture floating around too.... :rolleyes:

[Billy Golightly]

Well if you two would stop and think for a second without instantly posting before your brain can think, you'd realise he has posted here before and with several different angles of that trike. It is his.

[350Xccelerator]

ive seen it once before on here a while back, but ive never seen different angles, id like to see some of it from different angles.

[whiteman350x]

I have an 85 r with all white plastics. Still has the stock seat cover. My friends call it the Ghost R. If anyone will resize and post the pics, I will send the pics to them.

[Billy Golightly]

well the old pictures are gone because they had to be deleted when we cleaned the baord, but heres the thread. http://www.3wheelerworldforums.com/viewtopic.php?p=44124&highlight=#44124 Its probably been around alot of places because its a sweet trike.

[ATC crazy]

Well if you two would stop and think for a second without instantly posting before your brain can think, you'd realise he has posted here before and with several different angles of that trike. It is his.

The problem is...I was sitting here for a good 5 minutes thinking. I think my brain is fried :x

[Billy Golightly]

Marijuana and all those other "goodies" tend to do that.

[AirManCam]

Oh! Im sorry for jumping to conclusions. I have seen that pic on webshots and a bunch of differnet places but I understand why. I would like to see some recent pics :twisted:

[Big Otiz]

This is for all you people that dont think this is my bike. I bet you guys are going to think this aint my truck too. :twisted:
This is why it says property of ford world cause this is my gallery.
http://www.fordtruckworld.com/mygallery.ten?id=2778

[Big Otiz]

8)

[mkramm]

Dont your nuts get hot sitting on the muffler. I would have not brought it through the seat like that, but hey, what ever floats your boat I say!!! :shock:

[Kilborg]

Now now willis! marijuana frying your brain? You must be real bad off in comparison to me!! or was that from all the other various (yet exciting) household cleaning products you tend to so enjoy experimenting with?

Nice stuff you got there bigotiz, it must have taken lots of hard work. Im not a ford guy, and that kind of truck isnt really in my eyes tasteful, but good job regardless. I especially like your backyard, its got the "paradise in an acre" kinda thing going.

[Billy Golightly]

Now now willis! marijuana frying your brain? You must be real bad off in comparison to me!! or was that from all the other various (yet exciting) household cleaning products you tend to so enjoy experimenting with?


...household cleaners that I enjoy so much. Say what?

Your Honor the prosecution rests.

[freaksfix]

Here's mine Im sure it aint the nicest nor does it have any mods, but for stock she sure cleans up nice..

[AirManCam]

Thats some sweet ass trailprotrailprotrailprotrailpro man! How much did it all cost you :D

[md1985250r]

Dont your nuts get hot sitting on the muffler. I would have not brought it through the seat like that, but hey, what ever floats your boat I say!!! :shock:


W T F ARE YOU TALKING ABOUT????? THE PIPE LOOKS TO ME LIKE ITS IN ITS STOCK LOCATION!!!!!


BIGOTIZ....I BELIEVE I SAID IT BEFORE ,BUT I MUST SAY IT AGAIN.........THAT THING IS BAD ASS!!!! VERY NICE WORK...OH YEAH...THE TRUCK AINT BAD EITHER 8)

[AirManCam]

Dont your nuts get hot sitting on the muffler. I would have not brought it through the seat like that, but hey, what ever floats your boat I say!!! :shock:


W T F ARE YOU TALKING ABOUT????? THE PIPE LOOKS TO ME LIKE ITS IN ITS STOCK LOCATION!!!!!


BIGOTIZ....I BELIEVE I SAID IT BEFORE ,BUT I MUST SAY IT AGAIN.........THAT THING IS BAD arse!!!! VERY NICE WORK...OH YEAH...THE TRUCK AINT BAD EITHER 8)
I think the pipe is in the stock position also but hey you never know. Yeah the truck looks great and would be great if it wasnt a ford ;) :D

[md1985250r]

not to get off the subject or anything but,,,,,,,,i cant say ass but others can say trailprotrailprotrailprotrailpro????? WTF IS THAT???? THEY SAY ASS ON NATIONAL TV....YOU DONT HEAR THEM SAY trailprotrailprotrailprotrailpro DO YOU???

[AirManCam]

You have a good point I dont know why sh!t isnt edited. But ass is? But technicially trailprotrailprotrailprotrailpro isnt a swear word :D

[honda200]

freaksfix, that is a pretty nice R, compared to some of the ones i have seen (not on this board of course wink ) it is pretty nice, have any more pics of it? email me with some if yea can

curtis_plumton_505@msn.com

Curtis