Do they make big bore kits for tri moto

[Tri-Z dude]

I was wondering if they made a big bore kit for the tri moto 175
if not what is the stock size of the piston in it
that way I can get a piston ALOT bigger than stock
plus do they make a high comp piston for them to
will a 225DX carb fit on my tri moto
225DX is 4 stroke
mine is 2 stroke
will that make a Differerence
help would be appriciated :? :? :?
Ben

[YamaChuck]

No big bore kits available. You want to get more power out of it? Replace the stock 6:1 piston with a Weisco 10.25:1 . The standard bore is 66mm. If you swap carbs (if you can) you'll have to start mixing you're fuel and eliminate the stock oil injection system. Then you're going to have to re-jet the thing. Good luck! Question. Is this thing running now? You seem to want to hop it up to the max. You will probably sacrifice depenability with all these mods. That 175 is pretty radical, stock.

[Tri-Z dude]

i dont want to hop it up to the max
enough to beat my dads 225DX yamaha he has
my handa 200 wont do it
i dont mind mixing it manually
im just not sure how rich to mix it
if i mix it manually
i wont have to buy the oil bucket thing
now what about the carb
can i put one off of a 225DX on there
with no troubles
Ben

[ATC crazy]

a friend of my family use to do bore jobs in his basement. He bored my uncle's tri moto 175 to a 225 and its still running good. Sorry though, he doesnt do that work any more cause I tried hooking my friend up with him and thats what he said :(

[Tri-Z dude]

ya
but will if out run a 225DX though
i got a tri-z in peaces
but thats next years project
out 2001 beartracker 250 cant outrun my dads 225DX
so will some of ya help me out and what i should do to help my tri moto 175 outrun my dads 225DX
Ben

(p.s. in the pic below is my dads trike)

[Trikeaholic]

a stock 175 will destroy a DX in accelleration. Beleive me.

[Tri-Z dude]

i want it to beat it in acceleration and top end speed as well
trikeoholic
will a 225DX carb fit on my tri moto 175
ill mix oil and gas manually
thanx
Ben

[Tri-Z dude]

my yahoo id is rougster2004 if anyone wants to chat about this subject
thanx
Ben

[YamaChuck]

Ben, I would think that the 175 would certainly keep right up with the DX if not blow it away. Certainly the accleration part. Top end might be a different story depending on the gear ratio of the sprockets.

[Tri-Z dude]

will a tri moto 125 exhaust fit on a 83 tri mot 175
thanx
Ben

[YamaChuck]

No. They are different.

[Tri-Z dude]

just makin surethe guy i got my tri moto from found the exhaust and i should get it today
Ben

ohg by the way
225DX forks should fit on tri moto right
Ben

[Trikeaholic]

put it to ya this way. My 86 200x will smoke a DX or DR in accelleration and top speed. When we raced the 175 against the 200x, the 175 pulled away fast and the 200x could NOT catch it, in 6th gear, on a flat surface, the 200x could eventually catch the 175, but the DX/DR are 5 speeds, so....... Dont worry, the 175 properly running will slaughter the DX/DR. No offense to the DX or DR, but they are pretty slow, fun in the woods, and for bushwhackin there is nothing better, except mabey for a 250SX, but speed demons, they are not. I bet mine wouldnt do 45 MPH.

[YamaChuck]

Trike, I can reach 52 on a dead flat road with no problem at all. Benn clocked by several quads and a couple trucks. You're right, they are no speed demon but fantastic trail machines.

[Tri-Z dude]

will forks off a 225DX fit on my tri moto
im gonna due away with the oil injection system
that kinda eliminates some cost
do they have a high compression piston for tri moto
i want a big bore on mine im not going to hop it up to the max i just want alot of power to pull wheel off the ground in 3rd at least
Ben

[Trikeaholic]

the forks wont fit unless you can use the triple clamps too. the 175 has a wierd front fork set up---see the pics in the other post.

[Tri-Z dude]

c
i have looked the forks but havent tryed to put them on my 175 yet so
it turns out that guy didnt find the exhaust
who has an exhaust system
hmmmmm
i need to PM a certain person
Ben

[Tri-Z dude]

can my tri moto be bored to a 250
i need info on this trailprotrailpro i have it bored
Ben

i found a 225DX for 100 buck
can anyone buy a DX for that much or less
Ben

[3WheelHouston]

I could. Tell me the details where's it at and the seller's info and all of that. -Aaron

[Tri-Z dude]

i got the DX its and 84 model
i only had to put the rear end on it
but you know me
i had to tear it apart to see if he redone it right
the axle moved back and forth and up and down
i cant get the axle off
could ya send me pics of how to get the axle off
please help
i need to have it done by sunday cause were gonna go to the river on sunday about 11 a.m.
i need it done
does anyone have a 225DX axle
thanx
Ben

[Dynofox]

Tri z dude, do you have any extra parts for a dx that you would want to sell? I'm looking for the left hand controls and some of the electric starter parts. My e-mail is xcr600sp96@hotmail.com