carb replacement and lubrication wheel bearings?

[wopa20]

Just got a 1984 honda 200s. Manual says to lubricate wheel bearings and other spots, I have looked and there are no grease fittings. Secondly, I am replacing my carb with one i bought off ebay. Any sites with how to/step by step?

Cheers!

[Grizzlypeg]

Its probably not easy to get at your rear bearings. The old one's I have from a spare swingarm have a rubber dust seal on them.

I lubed by front bearings by removing them from the hub, popping off the dust shields, rinsing them in solvent, and then repacking by hand with grease.

As for removing and reinstalling the carburetor, I'd just work slowly and take notes on anything that looks tricky as you take it apart. It shouldn't be too hard. Not sure if you have a choke cable to remove on yours or not. My 200x just has a lever for the choke. The throttle cable unhooks from the throttle barrel after you remove it from the top of the carb.