" this guy ..... again !! "

[haggard 2hundie]

yup me again hahah so here goes checked valve clearance .003 check , t mark lined up on the flywheel check clean carb , petcock , and fuel lines , new air filter greased and oiled check , small crack in intake tube check ! heres what it does , starts fine and idles great ....on choke , no choke revvs real high , low r's good but sputters at full throttle my pilot screw is 2 turns out from a light seat .
is the cracked intake the cause of the high idle ? and the reason it idles great on choke ? less air pulled when choked ? anyway , where to find an intake preferably new ? p.s. the main jet is supposed to be a 112 which is what i got i ordered a 115. where do i go from here ?

[RodKnockRacing]

cracked intake is most likely the problem because its sucking air in and causing it to run lean

[haggard 2hundie]

thanks for the reply i hope your right i just wanna ride !!! and have my machine proper. how much for an intake ?

[Pafrig]

.....how much does a roll of duct tape cost?

[haggard 2hundie]

.....how much does a roll of duct tape cost?

looking for a more permanent fix but i guess if the tape seals it temp. it wil tell me fo sho if thats the isue.

[tapper190]

.....how much does a roll of duct tape cost?

I've used silicon myself,:lol:
Tapper

[Mr_RPM]

20 bucks, ebay. just checked. http://shop.ebay.com/?_from=R40&_trksid=p3907.m570.l1313&_nkw=200x+intake+boot&_sacat=See-All-Categories

choke makes your machine run rich, air leak makes your machine run lean. put them together it runs good, thats why she runs with choke

[KASEY]

you might want to check your pilot jet... usually if it won't idle or run without the choke on the pilot jet is plugged..

[haggard 2hundie]

thanks everybody im not as bad off as i thought ,its a brand new carb but it did sit with some gas in it for over a yr and i think i got it all cleaned out before putting the new carb on still gonna pull the carb off tonight to have a look will rtv silicone do the trick ?

[Thorpe]

Heard of guys dipping them in the rubber dip it (for like plier handles) for a temp repair....

[Grizzlypeg]

I used black rtv gasket maker on my cracked boot. I'd like to replace it.

Dried gasoline can leave a very tenacious residue that will defy many attempts to just wash it way. Once a passage is plugged, its hard to get anythign to flow through it to get the cleaning started. I would make sure you can blow through each passage to ensure its not blocked. Gas can dry as hard a paint.

[84honda200s]

I've used silicon myself,:lol:
Tapper


dito that ! ive also used eletric tape in a jam .. it got me home .. i have a spare 200x intake here if ya need one man ..

[haggard 2hundie]

8200s how much for the tube ?

[84honda200s]

pm me and we can work it out ..