View Full Version : '85 350X Carb adjustment problems
Beer_Smurf
09-03-2003, 02:57 PM
Working on a '85 ATC350X, all stock.
Trying to get it to idle/start.
Just barely idles w/ idle screw in all the way.
Pilot screw does nothing.
Carb is clean w/ new o-rings.
What gives?
ejc042
09-03-2003, 03:52 PM
If you have the needle on the slide all the way up the pilot screww will have little effect.
Beer_Smurf
09-03-2003, 04:04 PM
Needle was in the center position and is now one notch lower.
Is is possible for the main jet assy height to be off?
thanks.
ejc042
09-03-2003, 04:19 PM
Did you check the choke to make sure it is not stuck partially closed.
Yardbird
09-03-2003, 10:51 PM
Try this link out http://www.motocross.com/motoprof/moto/mcycle/carb101/carb101.html
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.