Help!

[TrikeKid]

I finaly got my trike but the wiring is completely butchered, so we have a non running 1981 KLT 200 A1 can some one tell me how to get it wired to at least run no lights or accesories i have the electrical components ( coil cdi regulator starter selinoid) i have a kicker on it and i can use that till i get a battery and battery box cover. i would like a diagram of the wiring since there are some parts that i'm not sure even belong to the trike. anyone know where i can get parts for this trike?.

[TrikeKid]

somebody at least has to know how to how to wire a cdi ignition with an electric starter!

[jeswinehart]

the best and only thing i can recomend is to go to bike bandit and see if they're diagrams can help you,,, i have all honda stuff.

john

http//bikebandit.com/PartsBandit/

[honda200]

from the fly wheel cover, the wires go off, take only the essentials, your kill switch and ignition and run some jumpers and try it, if it works, just build a wiring harness, there yea go.


Curtis

[TrikeKid]

Honda 200 theres only one wire out of the engine. but can some one at least tell me how their honda is wired i need to know how to wire the ingnition the starter isnt super super important since its the 81 and has a kicker i need to know how to wire the cdi into the whole mess im confused since the regulator has 3 wires the cdi has 3 wires and the coil has 2 :rolleyes: im guessing the extras are just grounds? anyone know where i can get parts for the green monster.

[YTZ250#1]

most harnesses have color coated wires,check to see if you can match
up wires from one componet to the next.

[honda200]

i will take a look at mine tommorow morning and post after i get home, i will let yea know how it goes together,

And, i am also with YTZ250#1 on this one, if you just absolutly cant wait, do that


Curtis