Atc125 crank dimensions pls

[WILL_S]

Hi newby here.I'm after a few dimensions of the crank of a atc125.I'm looking at putting the crank into another laydown honda motor.We didn't get the atc125 in australia so am looking at importing a crank and barrel.
Here's a pic of with the places marked i need the dimensions.
Thanks Will

http://i218.photobucket.com/albums/cc280/WickedWill_01/BIKE/cRANKsPECSATC125.jpg

[greenhuman]

We did get the ATC125M in Australia. I have 3 myself.
The crank will fit into 90/110 cases but the flywheel side is a different length and diameter due to the electric start setup.
The cylinder is the same stud pattern but there are a couple of extra 6 mm bolts the 90/110's do not have at the top and bottom.

[WILL_S]

Where would be a good place to look for a crank and barrel for 84-85 model in Aus?i've been searching for awhile over here .I thought the only ones here were imported from other countries so no spare parts locally.