Needle clip

[haggard 2hundie]

O.k. did some jetting homework ( thanks Thorpe ) and for future referance how do i get the needle clip out to adjust the needle position ? i dont want to damage anything or overlook something obvious , needle nose pliars do the trick ?

[MTS]

The easiest way.....Have to be careful...Is take the needle...put the flat-open side of the clip on a solid surface...like your work bench..and just press down on the needle behind the clip..will pop right off...Cant stress enough to make sure your finger and thumb are tight against the clip ..or you will bend the needle...or the clip...Could use needle nose pliers...but they tend to twist and bend things...IMO..