View Full Version : Metal Head Gaskets??
RodKnockRacing
05-05-2010, 08:22 PM
I was wondering are OEM metal head gaskets better than aftermarket head gaskets?
Shorty
05-05-2010, 08:26 PM
Yea they are better. At least to me they are..lol
RodKnockRacing
05-05-2010, 08:32 PM
What would be the advantages?
beets442
05-05-2010, 09:46 PM
Some(thicker) copper gaskets can be annealed and reused.
Mr_RPM
05-05-2010, 09:58 PM
metalhead gaskets enjoy good music, aftermarkets do not. LOL
200XMichigan
05-06-2010, 01:32 AM
Never used a metal one myself but according to a guy I know who built drag engines, in a stock application the paper ones seal better. Super high performance copper is better.
shortline10
05-06-2010, 06:23 AM
I herd honda changed over to the metal ones because the led content in the original style . I believe the old style is best for stock application . If you can find a copper BAPP one thats the best way to go and you'll never have to buy one again as its reusable .
RodKnockRacing
05-06-2010, 07:35 AM
Interesting thanks for the info guys.
Dirtcrasher
05-06-2010, 10:09 AM
The OEM gasket is not just a pure copper gasket. I prefer OEM for headgaskets just to be safe. Cardboard is cardboard so I'll use any brand on case covers but many times I use OEM headgaskets but it also depends on the brand and type of motor. Some are notorious for failures if anything other than OEM is used.
Admittedly, I have had no issues with any of the Vesrah gasket kits.....
On the 83/85 200X just make sure to put the o-ring on the right stud or the oil won't get up to the head. Shows you which one in the book.
rdlsz24
05-06-2010, 11:29 AM
I just tore down my 85 Big Red last night and it has a metal headgasket. Is this factory?
Rob
oldskool83
05-06-2010, 11:37 AM
metal shoul dbe factory. i had a cardboard on on me xr200 and the head leaked badly.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.