atc_88
04-27-2010, 06:25 PM
I was going through some fairly deep water on the 200x and it shut down. when i got it out of the water it wouldnt fire back up. so i i took it back and changed the oil, cleaned the air box (got a little water on the filter but squeezed it out and let it dry), cleaned the carb real well, and drained the old gas out to put in some fresh also new spark plug. i got it to kick start once after that but it took me forever when it used to start right up. if i push start though it starts right up and seems to run fine. once its warmed from a push start i can turn it off and start back up with the kick starter. but if it sits for even 5 minutes then i have to push start it again. also i just took off the cdi cover and their was some moisture on the inside of lid and on the pulse generator i think (little black box in their) Can anyone help me out please