Smaller rear sprocket for 200x('83-'85)?

[xr132]

Hi, I went from 22" tires to 18" tires on my ATC200x, needless to say it's VERY SLOW even with the biggest sprocket that fits on the front!
I'm looking to put a smaller sprocket on the back(about 34 tooth) and i was wondering if anyone knows of a link on where to get (i've looked all over) one or if there's a different sprocket hub that fits my axle....Would a sprocket hub from an '81 250R fit? OR....

[MonroeMike]

Both SunStar and JT Sprockets sell a 35 tooth.

http://sunstar-mc.com/home.aspx

http://www.jtsprockets.com/

[xr132]

Thanks very much!

[xr132]

Does anyone know where i could get a smaller one? If not i guess i'll haveta get the 35 tooth :(

[shortline10]

Go with a 14 tooth on the front , thats like going down 6 teeth in the rear and less expensive . I have a few rears will have to see what I have in stock .

[xr132]

Go with a 14 tooth on the front , thats like going down 6 teeth in the rear and less expensive . I have a few rears will have to see what I have in stock .

LOL! If i put a 14 tooth on the front i'd really be goin' slow seeing as i already have 15 tooth on the front! But thanks for the thought, i always like to put a bigger sprocket on the front vs. smaller on the back because of the price difference and there allot easier to change!

[BigO]

I dont know to much about 3 wheelers but i know with my drag bike i went down 2 in the front and up 4 in the rear the larger sprocket in the rear allows you to rip through the gears faster

[xrider]

Try sprocket specialties, they will have what you need.

[xr132]

Try sprocket specialties, they will have what you need.

Sprocket specialists? they list a 28 tooth to a 60 something! It'll cost 60$ for a 28 but how do i find out what the shipping is?