seanndenise
04-04-2010, 08:34 AM
hi
the elec start quit working on my 225dx recently and i cant seem to figure out whats wrong with it.
i replaced the solenoid and still no fix.
yesterday i took the seat, plastic and tank off too look at the wiring to see if any connections had come apart, i unplugged and reconnected all connections, they all looked pretty clean, no dirt or grease inside them.
the starter is good, i can jump the posts on the solenoid and it cranks the motor.
i have bared some wires below the starter button and still no engage, the starter button looks good all connections are clean and the solder looks good.
all i can figure is that theres a break in a wire somewhere or another electrical part is bad, im not much of an electrician but do half-ass understand electrical.
is there another part i can get tested or replace that would cause this? i want to replace a cheap easy to install part before i take it somewhere and have someone look for a bad wire.
any help is appreciated, thanks.
the elec start quit working on my 225dx recently and i cant seem to figure out whats wrong with it.
i replaced the solenoid and still no fix.
yesterday i took the seat, plastic and tank off too look at the wiring to see if any connections had come apart, i unplugged and reconnected all connections, they all looked pretty clean, no dirt or grease inside them.
the starter is good, i can jump the posts on the solenoid and it cranks the motor.
i have bared some wires below the starter button and still no engage, the starter button looks good all connections are clean and the solder looks good.
all i can figure is that theres a break in a wire somewhere or another electrical part is bad, im not much of an electrician but do half-ass understand electrical.
is there another part i can get tested or replace that would cause this? i want to replace a cheap easy to install part before i take it somewhere and have someone look for a bad wire.
any help is appreciated, thanks.