PDA

View Full Version : Sticky pullstart question


Xpress
03-20-2010, 04:30 PM
My 110's pullstart is sticky. It works fine, up until I pull it out too far, then it just sticks out.

http://img683.imageshack.us/img683/6465/dscn6641.jpg

http://img211.imageshack.us/img211/9726/dscn6640c.jpg

Any ideas? i had to pull it apart a few times from the rope breaking..
3wheelmecca
03-20-2010, 04:32 PM
the spring could be undone too far, not making tension, or the innards could be full of dirt or grit and could be jarring it. My 110 had that, and found out the rewind spring was busted.
Walkerallen
03-20-2010, 04:34 PM
the same thing happened to me. it was breaking until i pull about 5 and a half feet of rope in it. first make sure the set springs are correctly in place then put it back together with a longer rope
Xpress
03-20-2010, 04:50 PM
So I should clean it out, regrease, and use more rope?

I know the spring is nice and tight inside there, I wound it up like 10 times.
Walkerallen
03-20-2010, 05:03 PM
that would be a place to start
Twilight
03-20-2010, 07:59 PM
take it off and spray with white lithium grease then pull it to work the grease.

also make sure the spring is in the right way... ive done that =(
hoser
03-20-2010, 09:07 PM
take it off and spray with white lithium grease then pull it to work the grease.

also make sure the spring is in the right way... ive done that =(
Post deleted by Seadoo650
Not relevent to thread.
3wheelmecca
03-20-2010, 11:22 PM
They make lithium grease in an aerosol can?????? OH MY GOD!!!! that is awesome. no more buying tubs in bulk for Vince.