couple cool lttle tools!!

[aldochina]

found this little air pressure gauge in the tool kit of my new 250r. First one i have ever come across.


I also made a tool to remove the locknut on the sx/es swinger setup. No more beatin with a screw driver or chisel! Took me 20 min to file and reform the locknut from previous beatings.
http://i674.photobucket.com/albums/vv103/aldochina/102_2854.jpg
http://i674.photobucket.com/albums/vv103/aldochina/102_2855.jpg
http://i674.photobucket.com/albums/vv103/aldochina/102_2856.jpg

[jeopardy98]

My motorcycle has 2 different sized castle nuts just like that. I had a whole lot of the sockets machined with 1/2" drive adapters and sold them on my moto forum. Nice work.

[rdlsz24]

I made one of those out of a socket when I was working on my 125m

http://img.photobucket.com/albums/v603/rdlsz24/ATC/clutchtool.jpg

Rob

[jeopardy98]

Here are the ones I had made.

http://i49.photobucket.com/albums/f274/jeopardy98/IMG00004-20090218-1813.jpg

[aldochina]

Here are the ones I had made.

http://i49.photobucket.com/albums/f274/jeopardy98/IMG00004-20090218-1813.jpg

lol! mine is alittle crude compared to those, but it works. Those are nice though.

[Thorpe]

Here are the ones I had made.

http://i49.photobucket.com/albums/f274/jeopardy98/IMG00004-20090218-1813.jpg

Those a tits! Love shiny machined metal!

[aldochina]

mine is open on the other end, so i can hold the pivot bolt with with the allen as i tighten the locknut. therefor i wont accidently over torque the pivot bolt, the lock nut is torqued alot tighter than the bolt itself.