yt60 smokes but won't pop

[zxjim]

New to this...Just bought a yt60 and can't get it to pop...PO said he put new rings and piston in...Took silencer off and seems closer than ever to starting, but sill nothing...Thanks in advance, Jim

[zxjim]

It's gettin' spark...

[eyecekold1]

You got the right plug? If so how new is it? Anytime my zinger has a hard time starting its the plug.

[Thorpe]

Fresh plug, and make sure your exhaust is open... The expansion chamber is very prone to plug on the zingers.... Simple fix is to pull the silencer off, and take a half inch drill bit, and drill into the expansion chamber. (there is a mesh screen in there that gets plugged with carbon) A half in ch hole will eliminate that problem. Also, make sure your silencer is clean... Had to take mine apart and burn the carbon off with a LP torch, and scrape the crap out... Ran like a dream then...

[zxjim]

I will be trying all of these today...my back is killing me from trying to pull start the thing. Will keep everyone posted, Jim