1985 200S Oil Change

[sweetip2000]

I read the service manual for the 1985 Honda 200S.
Oil change. I see there is a screen that needs to be cleaned.

What confused me is the part where it says to take off the right crank case cover.
Remove oil filter rotor cover.

Install oil filter rotor cover with new gasket.
Where can I get these gaskets ?

Is there an oil filter on this bike ?

I am familiar with oil change on a 250SX and 350X but never worked
on the 200S before.

[daniel_250r]

i cut out my own gasket out of a cork for that havent seen any graphite in my oil, that rotor cover picks up all the dust from the clutch wich is graphite looking. my oil filter rotor o ring was missing and o boy what a scare looked like it ate a piece of alluminium. the oil filter is a metal screen behind the drain plug not a very efficient filter if you ask me but its cleanable. the screen always faces out behind the spring when reinstalling. good luck

[sweetip2000]

I will try some toyota motor sealer and see if there us a part # for that Oil Filter Rotor O ring !!
Picking up bike later today. Thanks for the reply.

[ailll1]

dont mind about gaskets they always say to change them,unless its leaking keep the same one