Yamaha 225DX hub and rims question!

[Mr. Noodz]

Question for you trikesters that know Yamaha! I am mainly a Honda guy, but I have always liked the 225DX. I picked up a couple of good ones to restore, but I can't find rims for the trikes. I wanted polished Alum, but no rims with the 3 bolt - 3/100 pattern. Might be able to get steel wheels. The rear rims are offset too.

Does anyone know if the Moto 4 225 hubs or any other Yamaha hub for that matter will fit the DX so I can use a 4 bolt pattern hub!

Thanks for the assist! .
Chris:Bounce

[Yamada]

Question for you trikesters that know Yamaha! I am mainly a Honda guy, but I have always liked the 225DX. I picked up a couple of good ones to restore, but I can't find rims for the trikes. I wanted polished Alum, but no rims with the 3 bolt - 3/100 pattern. Might be able to get steel wheels. The rear rims are offset too.

Does anyone know if the Moto 4 225 hubs or any other Yamaha hub for that matter will fit the DX so I can use a 4 bolt pattern hub!

Thanks for the assist!
Chris:Bounce

I bought a set of wheel and the guy told me they were from a Raptor, they are polished aluminium. You just need raptor hub too. And the wheels are 9'' in diameter.

[unclejemima]

Ah yes, I've just posted about already and so have others. Its a very popular thing to do because the 3 bolt setup on the YTM225DX is horrible. From what I've been told, the blaster hub works 100%, but it is a rim is 4/100. The hub from a warrior, raptor and banshee should fit as well, because they all have the same spline count. The rims on this will be a 4/115, perhaps a bit easier to source rims for. Check out this thread... http://www.3wheelerworld.com/showthread.php?108561-Yamaha-sport-quad-rims-hub-on-YTM225DX Take care,

[hotrodtodd]

i had a 1989 125 yamaha timberwolf that the hub fit a yamaha tri moto 175