hotwiring a big red

[redneckmcvea]

hello i have an 84 200es big red with a bad ignition switch. how do i go about hot wiring this.

[zppeacock]

I believe you can just unplug it. Some one correct me if Im wrong.

[200xman]

I believe you can just unplug it. Some one correct me if Im wrong.

Not quite but since the OP is new here and is asking how to hotwire something I doubt he will get too many responses. If you are truly missing a key, pul out the keyswitch and take it to the nearest dealer. They can cut you a key on the spot.

[madmel777]

on my 85 sx i cut the wires off the key and twisted the red and black together (Ignition was beat with a hammer) that did the job till i can get a new one

[redneckmcvea]

not missing the key. when i bought the bike u would sometimes have to wiggle the key to get the green nuetral light to turn on, now it wont turn on at all so im assuming the ignition went out.

[85200xrider]

disconecting the ignition will work...however you wont have the electric start or lights. i used to do this with my 250sx whenever my father would try and "ground" me from my trike

[redneckmcvea]

i have a toggle switch i can hook up to the ignition wires how do i do this. also my pull cord wont retract and i cant figure out how to fix it