ATC 110 Pull Start questions + CDI Confusion

[TheRealFatShady]

Hi,

Were there only two ATC 110 pull starts made? I have two, and both are different sizes. One is 'deeper' than the other.

I need the deeper one to attach it, and I only have the smaller size. Can I simply buy a new cover, or will I need an entirely new assembly?

Thanks

[shortline10]

3 different versions for the atc 110 model . 79/80..... 81-83 ...... 84/85 all different .

[TheRealFatShady]

Alright, I assume the only way I'm going to find out what my engine is would be to search it for a number....

Or I can take the 'deeper' assembly off my 81 and put on the engine I just put into a frame. If it fits and works I will just buy an 81-83 model.

[shortline10]

Very simple to find out what year motor . If its a 110 with points its a 79/80 if it has cdi and the recoil case is completely round its a 81-83 and if the recoil cover has a notch in the cover its a 84/85 model or post a pic and I can tell you .

[TheRealFatShady]

I looked at the engine, I managed to find this:

TB02E- 2729983

And it did say 105cc I believe.

Without researching the number at all, I'm inclined to believe this is a 1983 110 engine. This would make sense as the 1981 'deeper' pull start looks to fit it. (Have not tested yet)

[MonroeMike]

Tb02e- 2729983 = 1985 ATC110 (tb02e-2700001~)

[TheRealFatShady]

Thanks, that would make sense, here:

http://i21.photobucket.com/albums/b253/videogamer2005/atc006.jpg

Now my problem, isn't this supposed to be the CDI I use with this 85 motor?

http://cgi.ebay.com/ebaymotors/New-Honda-ATC110-ATC-110-CDI-Ignition-Box-1984-1985_W0QQcmdZViewItemQQhashZitem5ad625910cQQitemZ3 90139842828QQptZMotorsQ5fATVQ5fPartsQ5fAccessories
I have an identical spare one, but my motor's CDI is enclosed, here's the inside:
http://i21.photobucket.com/albums/b253/videogamer2005/atc010.jpg

http://i21.photobucket.com/albums/b253/videogamer2005/atc008.jpg

Any ideas?

[MonroeMike]

The term "CDI" is the type of ignition system.

The second pic is the pulse generator (#2) and the spark advancer (#1).

http://www.xtremeusa.com/fiche_section_detail.asp?section=116627&category=ATVs&make=HONDA&year=1985&fveh=2784

The third pic is the ignition module (#5).

http://www.xtremeusa.com/fiche_section_detail.asp?section=116657&category=ATVs&make=HONDA&year=1985&fveh=2784

[harryredtrike]

x2 mike is correct