PDA

View Full Version : What's Interchangable Between 84 200X and 86 200X



200XMichigan
11-29-2009, 02:46 AM
I found a donor 86 200X. Are the motor mounts the same even though they changed the frame designs?

Also are the engine covers the same? Says the 86 is only missing some covers for the engine and its the 6 speed 200X.

What else is interchangeable between the two years?

KASEY
11-29-2009, 02:54 AM
the grips,,,, other than that nothing...

Side Wayz
11-29-2009, 06:27 AM
pretty much whole different trike ground up. Bigger engine 199cc 83-85 192cc.Box frame compare tothe reg. tube. Sux.

Xfile
11-29-2009, 07:42 AM
Rear wheel hubs from the 86 can be used on the 85 to make it wider, front fork tubes interchange (not the triples), the front brake caliper and mount interchange, the rear brake caliper will work if you use the 85 bracket, complete front wheel and hub will fit the 85, the front master cylinder will work on the 85 (use the 85 brake hose). I think the headlight and shroud will fit the 85 and it looks nicer IMO. You could use the handlebars, clutch lever and thumb throttle on the 85 and maybe the carburetor with some jetting changes. Other than this stuff, nothing else I can think of.

oscarmayer
11-29-2009, 09:57 AM
may consider doing up the 86 as it's a much more valueable trike.