atc 70 light

[fordguy]

hi anyone know were i could get a honda nos light kit for my honda atc 70 1985
would need headlight and wiring and tail light

[KASEY]

hi anyone know were i could get a honda nos light kit for my honda atc 70 1985
would need headlight and wiring and tail light

85's never had lights.. its a build it yourself project..

[350Xccelerator]

dratv.com has all the stuff to do it

[shortline10]

I have a couple complete NOS headlights but no harness or tail light .

[Frankencelery]

Yeah, there was a kit, or at least one was planned. I've seen the diagrams. I think it used the ATC90 style round bucket, if I remember correctly. Whether it was ever sold or not is another question.

What I put on my son's was the DRATV one. Here's the link: http://www.dratv.com/athekitinwo.html

What I like most about this headlight is that it's very bright. Oddly, I think it uses the 15w bulb instead of the 25w. I'll have to look that up. But I didn't use a switch. This one is on all the time. I got some plastic plugs at my local hardware store to plug the holes, and it looks great!

Here's a pic....

Also look for my ATC70 taillight thread. Like a number of other people, I used an LED for the rear. Looks pretty good!

[fordguy]

hi do you have the bucket and sw and light do you have the head light brackets
is the kit new mborso81109@comcast.net email me i found a few parts still looking for the harness thank

[shortline10]

I have a complete red NOS in the box atc90 round head light with switch . I dont have the clamps or the harness . All you need is the hot wire from the acc stator and just a ground to the frame . The switch is built in the light .

[jensenracing77]

my cousin has an entire set that is used. i am not sure if he wants to get rid of it. if you want me to check PM me.

[oldtime3wheeler]

When I bought this 70 it had a broken round light on it. I switched it to a older 110 square light with the switch on the headlight bezel. Used the round light mounts. Works great. I thought I somewhere on here that Honda did make a headlight kit for them.

[blue27]

Honda made a Headlight kit but it was only listed in the 73-74 parts manual.

In used an ATC/US 90 headlight, headlight mounts and tail light, but used a taillight mount and wiring harness specifically for the ATC70, and are hard to find. You can use the Dr ATV mounts and an ATC90 headlight and fab up a harness, remember ATC70s are 6Volt also.
http://i389.photobucket.com/albums/oo339/blue2777/ATC70/73-74Headlight.jpghttp://i389.photobucket.com/albums/oo339/blue2777/ATC70/headlightpartnumbers.jpg

[oldtime3wheeler]

That is what my original set-up looked like. Minus the taillight

[fordguy]

thank's guy's anyone that has parts or set to sell pm me or email me
harness iam sure i could build
tail light and bracket for tail light look's to be hard to find

[Frankencelery]

I had that Honda NOS urge too at first....then I considered 2 things: first, I never really liked the light pattern on the ATC90 headlight (I have one), and to me a headlight on an '85 model seems like it should be square. It all comes down to personal taste, but I can tell you that the DRATV headlight really lights the way, much more than I would expect from a 6v system.

Having said that, I have a '79 that might get restored someday, and on that one I would probably go round. It has a more retro looking tank, and I think it would look better. The other thing you can't deny is that on the round bucket, the switch is built in.

[freaksfix]

Here is the set ups im runnin.. The chrome one i found NOS at a local Polaris dealer of all places, and the dual set up is custom by Freaks..

[blue27]

the tail light is off an ATC90 ans they are on ebay from time to time, the bracket is very hard to come by. I have only seen one nos one and I bought it , I have found some used one but not often. I have the Dr ATV square on on my 73 and I like it.