View Full Version : atc 110 points to cdi conversion - easy
hdeuce
11-12-2009, 09:50 AM
So after a rock hit the bottom of my engine on my 85 110 and took out a huge chunk were the drain plug is :( , time to replace the engine. I got a 78 90cc motor complete. I am looking to swap it in. Motor for motor. Question I have is, can I swap my CDi from my 110 to the points 90 motor? It seams straight forward because I have all the parts but wanted some advise from the experts.
Thanks guys.
rdlsz24
11-12-2009, 01:15 PM
I would like to know about this too. I have a points 110 that I can't get spark on. These points, contact breaker, condenser things have me confused lol. It would be so much easier if it was cdi.
Rob
atc500x
11-12-2009, 01:19 PM
Not sure if I'm correct or wrong,but I see a cam for these engine on ebay and they specified that it fit only on point model.....so maybe de point and cdi model have a different cam?
1979ATC110
11-12-2009, 01:26 PM
I looked into this recently, the only info I could find was this quote from the forum:
greenhuman
03-04-2004, 06:08 AM
You cannot swap the electrics. The crank end is completely different.
hondaATCman
03-04-2004, 09:21 AM
You can't combine both electrics but they did make a conversion kit for the points models. It took the points style motors and converted them into CDI, which would then be ready to bolt into a CDI sytle trike. I saw a kit on ebay a few months ago but are very rare. If you see one, jump on it quick.
1985BigRed250ES
11-12-2009, 10:27 PM
the cam for the cdi If i remember correctly is longer than the ponts cam.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.