View Full Version : I need some 225dx info
Dynofox
11-06-2002, 08:55 PM
How much oil does it take for the motor? Is there a screen or a oil filter? Anyone have a set of rear gold dx rims for sale? Thanks!
YamaChuck
11-06-2002, 11:13 PM
It takes 1.9 qts. and yes it has a filter, screen type.
Dynofox
11-07-2002, 12:03 AM
Thanks for the info, do you know which weight it uses? Thanks a lot!
YamaChuck
11-07-2002, 09:01 AM
They rerccomend 20-40. I run a 20-50 Castrol Syntec blend in the summer and 10-40 in the winter. By the way, where are you located? I live in the Canton,Potsdam,Massena area. Later, Chuck
sean8231
11-07-2002, 06:51 PM
Durring the summer I always use bel-ray 20-50, and 10-30 durring the winter months. I havent used it since summer, so before you ride it, you may want to put in thinner oil. I am gonna give you the service manual along with it, so any stuff you need to know will be in there.
Sean
Dynofox
11-07-2002, 08:36 PM
Thanks a lot Sean, I was just trying to find a service manual too! :-D
sean8231
11-07-2002, 08:56 PM
I'm really having a tough time finding a manual for the tecate. One of the guys on this sight gave me a link to a place and they have one for an 84, but they are waiting on someone that asked them to hold it for him.... :evil:
I got the Dx running a little while ago, for the first time in months.. Took forever.. I had to keep putting a shot of gas down the spark plug hole till it finally stayed running..... Ran great, I rode it up and down my street for at leat 20min, I forgot how much fun it is to ride after only riding the mojave for the past 2 months.... Its a wheelie monster, a little gas and the front end is right up..... You'll definitely want to put in the thinner oil before you take it out, the 20-50 is way too thick for cold weather....
I noticed thayou had asked where to get rear bearings, they are available almost any where, dennis kirk has them single or in a kit, I think the kit is 35 or something like that....
Dynofox
11-07-2002, 10:33 PM
That does suck your having trouble finding a manual, i'd just keep checking e-bay and on this site for someone who might have one. Heres a site all about tecates, maybe someone on there will have one. http://www.geocities.com/Baja/Dunes/6243/. I'm glad to hear the dx is running good :D
My 225dx will start but then die after about 2 seconds???? I can't figure it out. do I have a coil problem?? We tried pulling it to start it and it I choke it then it acts like it is going to start but just dies out... WHen I give her gas while I am pulling it she just acts like she is bogging down
HELP
sean8231
11-12-2002, 04:52 PM
Clean the carb out, mine was doing that, and I had to replace the float valve and seat... Those parts are only available from yamaha, and ended up costing me 30 for just that....
Or check the spark, is it big and blue, or small and red?
yamaha225dx
11-12-2002, 06:39 PM
OK I had just cleaned out the carb with air. but I am going to try and clean it with carb cleaner.. Thanks for the help.....
Tri-Z dude
11-12-2002, 08:55 PM
my dads 225DX was doing the same thing after he took a nose dive in the river
when we got it home
we cleaned out the carb
and ran better than ever
Ben
arcnandy
12-02-2002, 08:38 PM
yo did you ever ride up at the quarry behind panas
or the campground in the village. i used to live in quarry acres.
good hillclimbs back there
i have a 81 250r
what do you got trailprotrailprotrailprotrailprotrailpro
Guys, I'm rebuilding an old Yamaha 225DX, 1985 model and I need several parts starting with both front and rear yokes, cross joint, drive shaft, compression spring and coupling... Just to name a few. Does anyone have these parts used? Thanks
Lots_Of_Nothing
12-06-2002, 09:16 PM
yeah, i got em
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.