Tightening Clutch Bolts

[Just-Tri-It]

I took a Phillips screwdriver and ran the 6 bolts down on the clutch just till they quit turning by hand in a crisscross pattern. They spun in fairly easily and they bottomed or snugged up. In order to get 7-10 pds on them without a torque wrench would you say another 1/4 to 1/2 turn would be enough tension without over dong it?
Thanks

[85Tecate]

I took a Phillips screwdriver and ran the 6 bolts down on the clutch just till they quit turning by hand in a crisscross pattern. They spun in fairly easily and they bottomed or snugged up. In order to get 7-10 pds on them without a torque wrench would you say another 1/4 to 1/2 turn would be enough tension without over dong it?
Thanks

I never torque clutch bolts down just snug them up good. Others may not like this idea so they can be of more help.

[Dirtcrasher]

Snug is probably more or less of 7lbs.

I loctite them, just something I do and just a drop. I rarely open a motor back up after I work on it so why not safe guard it :D