200x rear shock.....

[4cfed]

i searched and couldnt find what i needed.. so... ima bigger guy 5'11'' 255 and i was wondering if there was a direct or close to direct bolt on rear shock that would suit my weight better?

[leevarnado]

you can use the 350x shock but you would have to fab a mount for it or get your 200x shock rebuilt for you weight .

[4cfed]

hmmm.. i got abuddy with a 350x and a bunch of parts.. and he is good with a welder.. supposto go riding out at his place this weekedns o ill have to look into that

[MonroeMike]

http://www.3wheelerworldforums.com/showthread.php?t=103654

[4cfed]

good info thanks! i dont want it to sit higher id just like it stiffer ( gonna spend alot of time sideways) and i want the most out of my slides and dont want it to compress and hooked harder .. i like stiff rear suspension for winter time

[shortline10]

They use to make HD aftermarket shock springs for the 200x because when you install a +2 swingarm you need a stiffer shock . I know you prob dont have the longer swinger but the spring would probably do the trick . Also did you tighten the springs nuts down to make the shock stiffer ?

[4cfed]

They use to make HD aftermarket shock springs for the 200x because when you install a +2 swingarm you need a stiffer shock . I know you prob dont have the longer swinger but the spring would probably do the trick . Also did you tighten the springs nuts down to make the shock stiffer ?


there about half way down right now

[shortline10]

If you got a spanner wrench crank that puppy down till it feels good .

[4cfed]

ok.. ill have to find a spanner wrnech... did my last 200x with screw drivers and it took me a half hour to do it lol...


went riding today and she feels pretty good sideways in the grass and mud so i prob wont have to go mutch more to get it where i want it