Interchangable front wheel hubs?

[MagicJames]

200x, 250r and 350x all have the same hubs correct?
Front hub that is.

[oldskool83]

yes but not. 85/86 250r was different. 83-84 250r is the same.

[eyecekold1]

If your asking if you can swap them from model to model I know that the 83-84 250r wont fit the 350x I tried it last night I wanted the wheel and tire and the 250r has a bigger bolt pattern on the wheel than 350x. As the as far as the hub goes the rotor is on the right side of the 250r and the left side of the 350x. the front tire size is the same on the 83-86 250r, 83-87 200x, and the 85-86 350x though 23.5-8x11. At least it has been on all the bikes I have seen and owned.

[81k]

83-84 250R and 83-85 200X wheels are interchangeable. 86-87 200X, 85-86 250R and 350X wheels are also interchangeable, I'm unsure on the hubs, but am assuming they would also interchange because the wheels are

[DeePa]

all the hubs are different. they may look identical, the spacers are identical, but they are all off a 1/4 or 1/8 or so in one of the shoulder areas or caliper spacing areas. you can make a spacer to space it over correctly, but you are better off getting the correct hub

[Dirtcrasher]

^ you got it Mikey...........

They are all similar but different. Different spacers and different dimensions to the rotor face etc etc. Any one of them can be made to fit if you can make up the spacers and or shim the caliper....