PDA

View Full Version : 85 250r find


EIGHTYSIX350X
10-20-2009, 05:17 PM
found this bike for 350 my friend needed $$$ i had to get it . It needs to be put back together . guy said it has a 360 in it ,is there such thing? for this model trike . its clean i got to weld the gas tank tabs seat clip
and some rubbers mounts other then that it looks solid ..http://i693.photobucket.com/albums/vv293/xstrikers/thebaby007.jpghttp://i693.photobucket.com/albums/vv293/xstrikers/thebaby008.jpghttp://i693.photobucket.com/albums/vv293/xstrikers/thebaby010.jpghttp://i693.photobucket.com/albums/vv293/xstrikers/thebaby011.jpg
deathman53
10-20-2009, 06:34 PM
yes there is such a thing and bigger, but not with a stock cylinder!!! Thats a 120-140 over stock sleeve or a 310(mostly bored out). It looks like the cylinder needs a new sleeve either way. Some people seam to think that a 120 over piston means it has 120cc's more, they are very wrong. A 68mm bore and stock stroke is a 263, 72mm bore and stock stroke is a 295, 73.5mm bore and strock stroke is just about a 309.
88 Turbo Coupe
10-20-2009, 07:08 PM
Never heard of a 360 LC. Doesn't mean it doesn't exist
deathman53
10-20-2009, 09:33 PM
the 350-370 bore is a very complicated build, special cylinder, bored cases, cylinder studs re-located, cases trenched and the crank is usually modified in some way too. It uses a 78-80mm piston, its huge. Once you go to a 350 and bigger, you can't go back. There is a way you can do a 330 in a stock cylinder, +5mm stroker crank and 310 sleeve bored out to almost the max. A 350 can be done with a +5mm stroker and 330 cylinder bored out, some have put a 330 sleeve in a stock cylinder, I don't think it worked very good. If he does have a 330 sleeve and +5mm stroker crank, its very likely its a 360, I seriously doubt.
Dirtcrasher
10-20-2009, 09:40 PM
Whats case trenching?? Don't mind me, I just never heard it before......
this guy
10-21-2009, 03:34 AM
Last time I checked the guys at ESR still do kits that big up to 370, little overkill though. Not very cheap to keep running.
deathman53
10-21-2009, 06:20 PM
case trenching is needed for over a +4 stroker, basically, over a +4 stroker the rod rubs the bottom of a cases, its exactly as it sounds, a flat trench is milled in the case to allow the rod to not touch the cases.
88 Turbo Coupe
10-21-2009, 07:20 PM
found this bike for 350 my friend needed $$$ i had to get it . It needs to be put back together . guy said it has a 360 in it ,is there such thing? for this model trike . its clean i got to weld the gas tank tabs seat clip
and some rubbers mounts other then that it looks solid ..http://i693.photobucket.com/albums/vv293/xstrikers/thebaby007.jpghttp://i693.photobucket.com/albums/vv293/xstrikers/thebaby008.jpghttp://i693.photobucket.com/albums/vv293/xstrikers/thebaby010.jpghttp://i693.photobucket.com/albums/vv293/xstrikers/thebaby011.jpg

SOO.. Are you doin the 360?
ATC250rr
10-21-2009, 07:41 PM
hey yall seen the sabertooth kit for the trx 250r im tring to implant one into my 86
harryredtrike
10-21-2009, 07:50 PM
hey yall seen the sabertooth kit for the trx 250r im tring to implant one into my 86

nice hijack of his thread
ATC250rr
10-21-2009, 07:53 PM
my bad got in tha mode
trikerooster
10-23-2009, 08:29 PM
You stole that bike from him at that price. It does look like it needs a new sleeve.