View Full Version : Aircooled 250r head with 2 plug holes
Jared200x
09-29-2009, 08:46 PM
I once saw a pic on here of a unknown 250r single cylinder head, aircooled,....with 2 plug holes,...one in the normal spot and a second one coming out at a angle?...can anyone out thread find this pic or thread for me...I can't seem to locate it again,...anyone know any info on this head?.,.......thanx......Jared200x
Dirtcrasher
09-29-2009, 08:55 PM
There have been numerous dual plug heads kicking around here.
The TC 200X racing head is one that comes to mind.
Who would think that another spark would make a difference but apparently it does!! :D
TYLER - maybe 250Rmanfmf (????) had the TC head, I think DALE or dizasterfun69's dad may have had one too or bought it from him, or sold it to him.............. I give up, sorry for being useless :)
I imagine you just run another coil wired in parallel to the CDI output.........
Jared200x
09-29-2009, 08:59 PM
any links to pic's?
200xman
09-29-2009, 09:00 PM
The 250 Odyssey had a head that held 2 plugs but only ran 1 at a time. I guess the idea was if you fouled 1 you could just swap the coil wire over.
Jared200x
09-29-2009, 09:02 PM
Are you talking Honda line stock?...or aftermarket?....
200xman
09-29-2009, 09:04 PM
Stock 250 Odyssey from the factory.
Jared200x
09-29-2009, 09:05 PM
Thanks,....I'll check into that
200xman
09-29-2009, 09:10 PM
You can see the 2 plug holes in this auction picture but now I also see it on has 4 head studs.
http://cgi.ebay.com/ebaymotors/1979-HONDA-FL250-FL-250-ODYSSEY-CYLINDER-HEAD_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQh ashZitem41493bfdd2QQitemZ280401542610QQptZMotorcyc lesQ5fPartsQ5fAccessories#ht_937wt_1167
The Goat
09-29-2009, 09:13 PM
...but what if you ran a coil wire to both?
CRAZY70MAN
09-29-2009, 09:38 PM
my mx 74 mx 100 had 2 hole but one was for spare plug and easy access for timing purpose??? Actually, it was just a normal plug but we put a spare spark plug in it. Not in position to actually do anything though????
Coaltrain
09-29-2009, 09:51 PM
In the airboating community a lot of people take gpu 220 engines out of ground power aircraft generators to put on their boat because they are cheaper than a yellow tagged aircraft engine. it's essentially the same as a 470 aircraft but it has single plug cylinders instead of duals. Everybody that adds a second magneto and adds a second set of plugs gets an increase of power. It's usually the first thing done to a gpu when it gets put on a boat.
jeffatc250r
09-29-2009, 10:09 PM
The 250 Odyssey had a head that held 2 plugs but only ran 1 at a time. I guess the idea was if you fouled 1 you could just swap the coil wire over.
I had an OLD yamaha yz 250. I think it was late seventies that had a similar setup.
I, have had a few old bikes, with the dual plugs, 1 Coil lead, Yea the idea is you have a plug crap out , ya swap it over, If your Jetted right for the application, Now running 2 plugs at the same time opposed to each other, You get a more complete burn of the fuel/air, Get 2 flame fronts That burn around the Combustion area and collide halfway- according to the theory, Which produces More Energy and makes that piston move faster, So said.
lndy650
09-30-2009, 09:25 AM
the sole purpose if there is a plug wire for each is for a more complete cleaner burn. some cars had this and being 4 stroke one would fire on the compression stroke and one would fire on the exhaust stroke for better emissions.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.