Homemade muffler?

[dan4governor]

Hey guys, my honda 200s atc is louder than snot and my neighbors are beginning to complain. is there any home brew methods that I can use to make it quieter? I would love to hear any ideas you have.
Thanks,
Dan

[MudBug]

Ive seen car mufflers mounted sideways on some big reds over this way. haha

[SWIGIN]

i made this one out of a yz 4 stroke dirt bike muffler.

[85Tecate]

i made this one out of a yz 4 stroke dirt bike muffler.

An idea i took from a "homeade" job. Pack it full of insulation, or something non-flamable, then cap the end with a piece of 1/8'' steel. Drill you about 8 holes in the end of it and call it good. :D

[1984ATC200S]

i no of one that was made with the old baffle, and a fire extinguisher, looks really sharp and will never rust out, i made mine using a cobra system that was rusted out, but its loud as hell so not much better than none at all.

[pipeline triker]

I have sean a # of them with a 8-12 horse Briggs and straten style. The Briggs muffler is just welded on to the back like the factory spark arrester.

[brapp]

use a pair of egsaust tubign reducers and a piece of 4 inch pipe or so and then put piece of smaller pipe trough it and make it ofset on the inlet and outlet and easily cheap

[CRAZY70MAN]

:lol: :lol: tell your neighbor's to pound salt!!! Just jokin, well not really but anyway I have used the thread on type for briggs and stratton motors on a trike and it helped a lot....... just reduced it down and welded it all and home made bracket s well. My neighbors love me.... I hope:lol: :lol: I was here first:lol: :lol: Good luck....

[Coaltrain]

I made a flowmaster knockoff up at work one day out of some scrap sheetmetal for my dodge 1500. It sounded like a real flowmaster, but my wife couldn't take the tone it emitted at highway speeds when we would take trips so it came off and a stock style one went back in.

[MTS]

Seen a wd-40 can with some holes in it, That would work.

[atcquebec]

Why don't you buy an original muffler from a Honda dealer for your 200S ?

[code200k]

I have sean a # of them with a 8-12 horse Briggs and straten style. The Briggs muffler is just welded on to the back like the factory spark arrester.

had a trx200sx with two of those stacked up on each other..worked but looked so bad,i bought the quad like this for 300 bucks and rode it hard:D

[mmiguy2103]

wow guys lmao i cant believe what i am readin here. this looks liek a redneck post so far


please just save the money and buy a new one,, or go in ebay and buy a used one for cheap.

[atcquebec]

wow guys lmao i cant believe what i am readin here. this looks liek a redneck post so far


please just save the money and buy a new one,, or go in ebay and buy a used one for cheap.

X2
There is a nice one on EBAY