peter250r
09-21-2009, 11:12 PM
g'day people,
got a problem with my 1984 atc125m. ive just recently
put new friction plates and srpings in the clutch.
now when the engine is running and its put in gear,the trike jumps forward while still at idle and sometimes stalls if not given enough throttle. also at idle it will
creep forward while idling in gear. ive adjusted the clutch to exactly what the service manual says and followed the manual exactly when putting it back together.
just wondering if anyone else has had the same problem before?
i also have a 1982 185s that i did the same job on,
but theres no problem as with the 125m.
got a problem with my 1984 atc125m. ive just recently
put new friction plates and srpings in the clutch.
now when the engine is running and its put in gear,the trike jumps forward while still at idle and sometimes stalls if not given enough throttle. also at idle it will
creep forward while idling in gear. ive adjusted the clutch to exactly what the service manual says and followed the manual exactly when putting it back together.
just wondering if anyone else has had the same problem before?
i also have a 1982 185s that i did the same job on,
but theres no problem as with the 125m.