Need help adjusting swing arm on 200x

[inv3ctiv3]

So I noticed the gap on the two swing arm adjusting bolts are not the same on my '85 200x.....What is the correct gap for these? Should they be right in the middle, further in or further out?

Here's the bolts I am talking about:

http://farm3.static.flickr.com/2673/3919330101_aa09c8f4c2.jpg

[seadoo650]

They should be the same on both sides. If one side's gap is further thwn the swinger will sit crooked. Just adjust both evenly till you have about one inch up/down play in the chain.