Honda 250r Need help... pics***

[Nevois]

I have a 83 honda 250r that iv totally rebuilt.... All i need is a good bottom end for it.... I have 2 that need rebuilt... If anybody has a good bottom end please let me know... im in desprit need of one.... thank you

[Saul]

why not rebuild one of the two bottom ends you have?

[Nevois]

I started tearin apart me 82 to get ready to split the crank cases and i came to a dead end.... and i think i might have pulled the shift fork shaft out to soon... if somebody could direct me from here i would greatly appreciat it... I also found were im leaking oil into the crank at posibly (B) were my finger is pointing, the bearing is really loose i can see it move around inside the socket... How do i change this...?? (A) is the shaft i removed and i heared the shift forks i think fall... if sombody could explain what i did it be tons of help... thanks TONS
sorry bout the blurry pics... i got 1 good one...

[KASEY]

where your finger is does not go into the crank,,, the seal on the crack on the clutch side is where you would get oil .. or between the cases if the gasket is bad,,, also if your splitting the cases the shifting fork is no big deal,,,

[Yamahondaman]

Hey Nik ... Did you GIT the swinger Bolt ?