28mm dg keihin carb

[leevarnado]

has anyone ever used this carb,28mm dg keihin carb,how good would it work a 83-85 200x.


http://www.bikebandit.com/product/16985

[Erics350x]

what intake would ou use?

[Dirtcrasher]

That is yet another 2 stroke carb with a fuel enrichening circuit that I could not get to start in 20 degrees, I'll try again, but I don't have much hope.....

A carb is a carb, but unless that cold air let in thru the intake can be closed down with a 4stroke butterfly valve, someone is gonna have to explain to me how to make these work. I bought every pilot jet from 10 to 65, tried every air screw setting and anything else most people would suggest.

I could not get it to start in the cold yet still run well.

I CAN get it to run well in the heat but in the Northeast, we need it all......... :D

[shortline10]

The carb is the easy part to find its the aftermarket old school racing intakes that are hard to find . shens

[oscarmayer]

or you can get a 30mm makuni off ebay for like $40.

[Erics350x]

That is yet another 2 stroke carb with a fuel enrichening circuit that I could not get to start in 20 degrees, I'll try again, but I don't have much hope.....

A carb is a carb, but unless that cold air let in thru the intake can be closed down with a 4stroke butterfly valve, someone is gonna have to explain to me how to make these work. I bought every pilot jet from 10 to 65, tried every air screw setting and anything else most people would suggest.

I could not get it to start in the cold yet still run well.

I CAN get it to run well in the heat but in the Northeast, we need it all......... :D

Why not run a primer kit from a jetski or skidoo?

[Dirtcrasher]

^ Eric, only because I thought I could get it to work and it was terrible to try and tune, so many hours - on off fenders carb tank airbox etc etc etc.... I just got sick of it :(

I'd like to find a VM28mm "GENUINE MIK" with a butterfly choke and work from there :D

I can't make a rubber buffered intake but I can make a smooth solid one that sets up and over or etc etc....... :beer:

[leevarnado]

here's a adapter i found,with some mods,some one prob get it to work

http://tboltusa.com/store/product_info.php?cPath=51_38&products_id=599