250r swinger bolt

[Nevois]

I got my swinger bolt out but i pretty much ruined it in the process.... whats the easiest way to get a new one.... of the subject but what kind and how much oil do i use in the crank case....

[Nevois]

i have another question... the motor i took off had a 13 tooth sprocket.... the one im putting on has a 15 tooth... i have a 44 tooth rear sprocket... should i switch the fronts or will they work... thank you

[FastZ28]

A Honda 400ex bolt and nut will work too. Cheaper and easier to find. Thats if your talkin about a water pumper.

[Yamahondaman]

what year ATC is it......... :pics:

[deathman53]

I wouldn't use the 15t front sprocket, you can't fit a case saver with it. Why a 44t rear? if you have a 13 front now and want to keep the same gear ratio, get a 38t rear. IMO thats way too low, I've used it, I use 14/38 and 14/36. I'm talking 85/86 r's. A 400ex or 450r swingarm bolt will work with 85-89 r's. How did you mess up the swingarm bolt? If the end threads, you can fix them. If bad, cut it back 2 threads and run a 14mm 1.5 die. Your local auto shop probably has one, thats a common size for spindles and steering components.

[Nevois]

its an 83 honda 250r.... heres some pics.... http://viewmorepics.myspace.com/index.cfm?fuseaction=user.editAlbumPhotos&albumID=2554619