200 to 250 part swap

[Silverado]

I have a 250sx and I have been rebuilding the front end brakes... I still need the Brake level and perch so I can attach it to the handles as well as a piece that fits onto the fork (holds the wire) and there is a spring as well as some little cylindrical piece with a wingnut or something that goes in there by the spring and holds the line on the metal level which makes the brakes work....either way I can not buy them and I do not see it on Ebay motors or bikebandit.

I'm sure most of you know the parts I am talking about.

My question is....I know where a scrap 200 is....would the brake equipment from the 200 (the pieces I am talking about) fit the 250sx ....anyone know if the hardware is compatible ?

if you look at http://www.bikebandit.com/houseofmotorcycles/honda-atv-atc250sx-1985/o/m1913 I am talking about parts 10, 13, 4 as well as the entire handle and connection to the bars

[Thorpe]

I recently bought all the same parts for my BR at Service Honda... You can get them there... B.B. kinda sux

http://www.xtremeusa.com/fiche_section_detail.asp

[Silverado]

That is a great site. I will buy the parts when I hear back from everyone as to if the 200 parts fit the 250 or not

[Tri-ZNate]

Only the metal cylinder will interchange not the spring or nut. Its only $5 anyway

I crossed part numbers with a 200es. Might want to check the actual model if you know it, its only $5

[TrailerRider]

Dude, tryed dratv.com (http://dratv.com/index.html) yet? As far as I am conserned they are the best next to dealer items which you can't get anymore (usually)

250SX: http://dratv.com/250sx.html
Brake perchs/Handles: http://dratv.com/atboandcopa8.html