Removing twist throttle

[posty2100]

hey guy simple question I got new grips for my T3 and dont know how to change the twist throttle side? I have never messed with the twist throttles before. I have a online manual but has nothing about the grips.

[dcreel]

Cut them off with a razor blade. Or grab the inside edges of the grip, put your foot against the fork and pull... hard. Personally I just cut them off. There is no need to remove the twist throttle itself. I've also used dykes to cut off the grip in a pinch. Start at the inside of the grip and cut until you get to the outer edge or enough of a cut to pull the grip off.

[topless]

If you have compressed air, just stick the nozzle under the edge, hold onto the lip, and the air will lift the grip right off the handlebar/throttle. Installation is the same process.

[posty2100]

I got it, I took the whole twist throttle assembly off and the grip is held in my the bolts that hold the throttle onto the bars. Pretty simple but I didnt want to tear into it and have problems with the cable or something else but was real simple.