View Full Version : 200x parts in 200m questions
whiteman350x
08-04-2009, 05:30 PM
I need to rebuild the topend on my 200m. I want it to have a little more power. I know the 200x piston will fit but will the 200x cam fit also? If so, any clearence issues w/ valves ect? What about the head swap? Would that be worth doing also? I would think the x would have bigger valves right?
shortline10
08-04-2009, 05:57 PM
Valves are the same size but the cam is bigger on the X and the stock X flat top piston will increase compression over your M piston and if you can find a 200x carb you will get 2 mm larger their also . You will feel a HP increase . You will loose the compression release if you change to an X head so I don't recommend it .
AutoXer
08-04-2009, 06:13 PM
the xr cam is bigger than the 200x if you want a budget build or go to mega cycle and get a real cam and springs
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.