WHAT is Good 350x cam

[big specht]

I have one that is has a big bore and stroked and ported . Who makes a good mid to top end cam?

[Dirtcrasher]

I honestly don't know who else makes them besides WebCam, (which also makes Powrolls cams...)

I'd get a good midrange Webcam, hardened rockers and the spring and retainer kit.

I wouldn't go towards the scale on a full on race cam unless you want all top end...

Is it 10.25:1 or 12:1 ?? Any details on the bore, is it re sleeved or punched out to a fairly thin wall??

Sounds nasty :naughty:

[Jonpin]

I honestly don't know who else makes them besides WebCam, (which also makes Powrolls cams...)

I'd get a good midrange Webcam, hardened rockers and the spring and retainer kit.

I wouldn't go towards the scale on a full on race cam unless you want all top end...

Is it 10.25:1 or 12:1 ?? Any details on the bore, is it re sleeved or punched out to a fairly thin wall??

Sounds nasty :naughty:

I been wanting to get a good cam for my build but like you wher saying i want low end and mid basicly for trail riding so far i have a mikuni carb it has 31 in the side of it not sure on the size but the guy had it on one of the bikes when i got it and it has a cobra pipe or super trap not sure which is going on it yet but i have both .but i was just looking at the first cam webcams shows for the 350x it says its good for full range of power is that just a stock cam "i dont know what the stock durations are" or would it imprpve my bike or should the next up be the ticket i will also be putting in a 10.25:1 wisco piston in it.

[Yamada]

[QUOTE=Dirtcrasher;767163]I honestly don't know who else makes them besides WebCam, (which also makes Powrolls cams...)
[QUOTE]

Megacycle also make camshaft for the 350X. Ask The Goat.

[Dirtcrasher]

^ Yep - I wasn't thinking......

http://www.megacyclecams.com/catalog/pages/page%2027.pdf




Jonpin, as far as WEBCAM goes - I think the 55-741 would work great for you and maybe 55-671 for Specht.......

[SWIGIN]

i can tell you first hand that the megacycle full race cam has loads of midrange and tons of top end.

this is my cam of choise

[Jonpin]

^ Yep - I wasn't thinking......

http://www.megacyclecams.com/catalog/pages/page%2027.pdf




Jonpin, as far as WEBCAM goes - I think the 55-741 would work great for you and maybe 55-671 for Specht.......

Awsome thank you for your input im going to look into "if it sux its all your fault:twisted: " Just kiddin.

[big specht]

Its a 89 bore and will be ran on top end more it's probley going in the pulling bike

[kiser]

Specht you cheatin SOB what do you have up your sleave now?!?!

[Daddio]

Specht you cheatin SOB what do you have up your sleave now?!?!

Talk about the pot calling the kettle black.
The guy with a 140cc motor in his atc70 calling someone a cheater. Now that's some funny trailprotrailprotrailprotrailpro I don't care who you are.

[Dirtcrasher]

i can tell you first hand that the megacycle full race cam has loads of midrange and tons of top end.

this is my cam of choise

I guess like you like that cam.... Did you find any stumbling down low? I mean, if a cam can match stock in one area yet still pull really well in others, how can a guy complain?? :D

Sounds like your very happy with that cam, I'll cut and paste this to my "ATC Saved" folder :D What was the compression on this motor you liked? and I'm assuming it wasn't stroked? Carb??

I respect your opinion, you've got some skills :beer Do you run an FCR carb with the cam you suggested above and or on the Ascott motor build?? Just curious :D

[big specht]

Specht you cheatin SOB what do you have up your sleave now?!?!

My 70 with a 89mm bore:lol:

[bansheejoel]

talk to greg at cycleworksracing im sure he can make you a one off cam with any lift you want. Just tell him your mods and im sure he can hook you up. He made me some .405 lift cams for my mojave and they work AWESOME!!!