PDA

View Full Version : ATC 110 chain problem


1985BigRed250ES
07-08-2009, 09:37 PM
I put the chain on my 110 today the chain as far as I can tell fits on the front sprocket but I cannot get it to fit the rear sprocket. The rear sprocket is a 49 tooth, not sure what the front one is but I believe I got it from bobbyjim here on the forums and he said it will fit the 110. The chain is a 428H. what am I missing here?:wondering any help would be greatly appreciated.

Jordan
1985BigRed250ES
07-08-2009, 09:41 PM
double thread, sorry mods, admins please delete.
somekidwithanm4
07-08-2009, 10:20 PM
Will it just not fit or can you not get it on?
1985BigRed250ES
07-09-2009, 07:34 AM
it will not fit the rear sprocket. I had to "roll the chain on" like you would have to on a bicycle and it sits on top of the teeth on the rear sprocket instead of in the valleys between the teeth.
MonroeMike
07-09-2009, 08:59 AM
double thread, sorry mods, admins please delete.

You can delete the post yourself, click edit.
atctim
07-09-2009, 10:08 AM
Sounds to me like either you have an extremely worn out rear sprocket - or it is plain and simple the wrong sprocket. My guess is that it is badly worn.

Is it hooked?

http://dirtbike.off-road.com/dirtbike/data/articlestandard/dirtbike/092007/407485/1_l..jpg
1985BigRed250ES
07-09-2009, 11:42 AM
Its a new sprocket, I used it along with the axle and bearing/axle carrier out of my old 1981 110. the sprocket was just replaced two years ago but has maybe 50 miles on it.
harryredtrike
07-09-2009, 12:00 PM
post a pic and all your questions will be answered by the gods
1985BigRed250ES
07-09-2009, 02:45 PM
didnt the 79-81 atc 110 have a 49t rear sprocket? and 82-85 had a 50t right?
1985BigRed250ES
07-09-2009, 02:49 PM
the chain, I know fits on the front sprocket, when I put it in gear and give it some gas, the chain does not catch on the rear sprocket, just kinda slips on top of it and it will not stay in the "valleys" on the sprocket even when tight. The sprocket is about two-four years old but only has about 50 miles or so on it. The sprocket is not worn, just dont know what I am missing. It has the #428H chain on it, it is a heavy duty chain could that be the problem?
atctim
07-09-2009, 03:42 PM
Do you have an old chain from this machine? If so lay it on the sprocket and see if it fits.

Sounds like the wrong sprocket now.
1985BigRed250ES
07-09-2009, 08:46 PM
I tried an old chain and it worked! the chain is kinda loose (stretched) and I will replace it tomorrow. the old chain is a 428H. the "new" one I had is too short I guess, because the "old" chain that is stretched, worked just fine. thanks for the help guys!!