Activity Stream

For something that's sat a while, but runs, you can try to fill the cylinder with a product and let it sit a few days. Mystery oil, Seafoam,...

Awesome. Thanks for sharing.

If the tank dents don't have creases, a good shop can work them out from the inside. As far as restoring the tank, I'd consider the overall condition...

They are known for running away like that

Welcome to the site! A big red tank will be too big for a 200S. The 185S and 200S tank should interchange. A 200M and 200e/s tank will...

I bought the reproduction 1973 atc70 and it's close to OEM not as refined because it's handshape but it gets the job done!

dang... they sold quick

A little more progress this week. The rear end is now complete and the airbox & filter are installed. Steering stem bearings, flushing the tank...

Or a air leak at carb mount to head.

Did you put a bigger cam in it ? It might have a small radius on the bottom of the cam and when you adjusts the valves for that cam it put the arm...

I recently had the same issue. Adjust your valves again and make sure the engine is on TDC. I thought I had the engine on TDC for the first...

Thank! I'll try all of that tomorrow

Idle speed of engine at operating temp (after 10 mins of riding or running engine in neutral with big box fan blowing at it from front) should be...

A carburetor cleaning and tuning should correct the issue .

Yeah, WoW on the resurrection - Very nice work ! Soon, I'll be re-firing mine back up once I get the rear end re-assembled with its new All Balls...

I looked at your 3 photos too and shortline10 is correct : the splined spindle shaft just forward of your gear shifter pedal there on the left side...

Great job resurrecting this beast! I also ran a 3-wheeler (ATC110 with Yamaha 250ZYZ swap screacher) ever ever since mine died (my "buddy" killed...

FAT KID has the look now. Front wheel is centered with the cut up OEM 84 front brake plate. I have to make a new stainless steel axle spacer for...

The problem with that is that I don't like using my phone for that stuff. It's always laggy and off and never reads the thing correctly. I'm pretty...

Yeah, I was going to buy them but they sold before I could get them. Came here after looking for some.

If you have a typical cell phone, you already have all you need. Buy a phone mount and install an app. Quad Lock is a good choice. I've got...